Support OPORA CO-3
The support OPORA CO-3 provides rigid fixation of a standard calibration block CO-3 position.
The support eliminates the annoying factor of instability of the CO-3 calibration block, and thus effectively increases the speed and accuracy of determining the following parameters:
- Entry point of П121 transducer.
- Arrow of П121 transducer.
- The delay in the prism of П121 transducer.
- Operating frequency of П121 transducer.
- Reserve of sensitivity of П121 transducer.
| Material | Aluminium alloy | |
| Overall dimensions (L×W×h) | mm | 80×40×23 |
| Weight (with a screw) | gr | 81 ± 2 |
| Protective and decorative coating | Colored anodic oxidation | |
| Setting niche for СО-3 | mm | 72×32×20 |
| Volume for collecting contact liquid | ml | 25 |
| Range of an inclination of a CO-3 working surface | ± 45 from the horizontal position |
NOTE
The support doesn't create acoustic influence on CO-3 calibration block.
The support is adapted for quick change of the sample position without additional tools.
The support has non-slip oil-resistant legs.
There is a bilateral gap for effective collecting the flowing-down contact liquid between the support and a CO-3 calibration block.
The support promotes cleanliness of a workplace.